How To Turn On HP Laptop Without Power Button

If your laptop has been used for a long time, it is likely that some of its components will fail over time. Other than the primary components, the laptop’s internal components include smaller parts such as ports and keyboard keys.

A broken power button can lead to frustration, making it very difficult to turn your laptop on. This guide will show you how to turn your laptop on without the power button. This guide will walk you through several methods to accomplish the same.

Laptop Power Button not Working: How do I install a new power button?

Before you attempt any of these solutions, make sure you first install a replacement power button. This is because a working and physical power button is quicker and easier to use than the ones listed below. You can also follow these instructions, which are basically the same for all laptops.

  • First, search for and purchase a compatible power switch that fits your laptop.
  • You can then open your laptop by removing the bottom cover using a screwdriver.
  • Once you’re inside, take off the entire motherboard and keyboard to reach the backside.
  • Finally, take out your power button and then install the new one. Be sure to connect it to your motherboard before you close your laptop.
  • To turn on your computer, you can use the power button that was just installed.

Step by step guide: How to turn on a laptop without power button

Even if you cannot find the power button or are waiting for one to be available, those who can would still like to use their laptops without the power button will not have any problems. There are many ways to turn on your Windows laptop without using the power button. These methods can be used to do the same.

How to use a Keyboard

You can use the laptop keyboard to turn on your computer without having to press a button. As shown here, you can activate this setting in the BIOS section of your laptop.

  • Hold F2, F10, and the DEL keys to switch to Windows.
  • You will find the Power Management settings here.
  • Then, you can enable the option and then exit by pressing F10.
  • Even if your laptop has been turned off, you can still turn it on by pressing any key on your keyboard.

The Motherboard

If your laptop is not turning on in the first place, or you cannot access its BIOS to modify keyboard settings, you might need to use this hardware-based approach. It is not practical to use your laptop every day, but turning it on using the motherboard may be an option.

  • Open the laptop’s cover, and then remove the motherboard by using the appropriate tools.
  • Once the motherboard has been removed from the chassis, be sure to check that all other connections are intact.
  • Next, remove the power buttons connections from the motherboard. Shorten pins 1 and 3, using a metal screwdriver. Your laptop will then turn on right away.
  • Once you’re done, you can access BIOS to make any changes after installing your motherboard.

With the Clock Battery Method

You can also use the clock battery method to turn your laptop on without having to press the main power button. Although it will reset the BIOS settings on your laptop, it’s much faster than the motherboard method.

  • To open your laptop, first remove the bottom cover with a screwdriver and other tools.
  • Now disconnect the battery cable (which is different than your laptop’s charging cord) from your motherboard.
  • After this, take out the clock battery or CMOS battery from your laptop motherboard.
  • Connect your battery to the computer. It will immediately turn on your laptop.

Wall socket

A few laptops have the ability to force start their laptops using the wall socket charger. This is similar to the clock battery method. These instructions will help you open up your laptop.

  • Start by opening your laptop with the correct tools. Next, take off the bottom cover to reveal the motherboard.
  • Take the battery cable off your motherboard. Now connect your laptop charger.
  • Once your laptop is connected to the power source, it will immediately turn on so you can access it easily.

The Laptop Lid

You might already use your laptop’s lid to put it down, but it can also be used to turn on the laptop when it is turned off completely. To do this, change the BIOS settings.

  • To access the BIOS, hold F2, or F10 after you have turned on your computer using either the hardware methods or the power button.
  • Once you have accessed it, open the Power Management or Power Settings tab.
  • You can enable Power on With Open Lid by clicking here. Then, save your settings and hit F10.
  • Now, your laptop will automatically turn on when you open its lid.

Use Wake On LAN

The keyboard and lid can be used to turn your laptop on, but you don’t need to use the power button. You can also use the LAN connection. Like other similar features however, it must also be enabled via the BIOS.

  • You will first need to access your BIOS with any of the settings described earlier in this guide.
  • Head to the Power Management section. Enable Wake on LAN. Save your settings by pressing F10 on you keyboard.
  • After that, you can go to Device Manager under Windows by pressing Windows Key + X.
  • Locate your network adapter, then click on its Properties. Select the Allow this device be used to wake the computer option in the Power Management tab.
  • Under the Advanced tab, enable Wake on magic package.
  • To turn on your laptop over a LAN connection, you can use any network app or supported router installed on another device.

Conclusion

Even if you need a replacement power button for your laptop, it’s still advisable to keep using it until your computer is serviced. There are many ways to turn your laptop on and off without using the main power button. You can actually find a complete guide to how to do this up there.

There are several ways to access your computer. Once you’ve read all about how to turn on a laptop with no power button, feel free to leave comments. There are many other ways to ask questions.

Daniel was born in Auckland and raised in Calgary, except for the time when he moved back to Quebec and attended high school there. He studied Physics and Science at the University of Auckland. He began writing after obsessing over books.

Leave a Reply

Your email address will not be published.